The term DHCP stands for Dynamic Host Configuration Protocol. Every Linksys wireless router can be used as a DHCP server. This means that the router can automatically assign an IP address to any device on the network. You should know that this server is enabled by default. However, in case it is not enabled on your router, and you would like to change that, then it is recommended that you walk through the instructions mentioned in this article and learn how to do the same with the help of the Linksys router login username and password.
Steps to Enable DHCP Server on Linksys Router
1. Connect the Networking Devices
You can kick off the process by ensuring that your networking devices are connected. In case, they are not, join them now with the assistance of an Ethernet cable. If you do not have a thing for wires, then you can opt for a wireless source of connection to connect the Linksys router to the existing modem.
Note: In case you are connecting the devices wirelessly, ensure that the distance between them is neither too much nor too little.
2. Load an Updated Internet Browser
The next step is to open an internet browser on your already powered-up laptop. Make sure that it is updated. Once assured, in the location bar, enter the default web or Linksys router login IP address. Pressing the Enter key located on the keypad of your keyboard will take you to the next page.
Note: Whether you use the web or IP address to log in to the networking device, see to it that it is not entered in the search bar, even by mistake.
3. Access the Browser-Based Utility
Enter the username and password into the USERNAME and PASSWORD fields respectively and hit LOGIN. Make sure that you are entering the admin login credentials only in their fields and not each other. Soon you will find yourself on the main dashboard of the router. It is called the Linksys router setup wizard.
Note: The admin login details are case-sensitive. This means that they need to be entered in the exact way they are. So, turn off the caps lock key.
4. Select the Basic Setup Option
Now that you have logged in to your Linksys router successfully, click the SETUP tab and then, BASIC SETUP. Review the DHCP SERVER SETTINGS fields. You can do these things: Enable or disable the DHCP server, Change the starting address of the server, and change the number of users.
Note: It is recommended that you do not miss any step while trying to enable the server. Otherwise, you will get stuck with technical issues in the future.
5. Click the Save or Apply Button
At last, you may click on the SAVE or APPLY button so that the changes you have made to your Linksys wireless router get saved. In case, you do not want to set up the DHCP server on your networking device via the manual method, then use the Linksys application for the same purpose.
Note: Not sure about how to enable the server via the mobile app? Well then, refer to the instructions given in the user manual of your Linksys WiFi router.
Not Able to Setup DHCP Server?
In case you are still not able to go about the process with ease, then you should not waste any more time to reset Linksys router. To execute the process, locate and press the reset button located on the networking device. After the process ends, set up your Linksys wireless router from scratch.
The Bottom Line
Here ends the guide based on the steps to enable the DHCP server on the Linksys wireless router with ease. In case we were able to help you to execute the same process, do not think twice before sharing your feedback with your fellow readers. In case you are wondering how this can be done, then it is suggested that you use the comment section located at the bottom of this post, in case it has one. By any chance, if it does not, then just remember us under the list of people who did well for you. With that said, we are signing off.
